Tutorial – How to Make Reusable Baby Wipes

I thought I’d write a quick tutorial on how to make homemade reusable baby wipes. I basically cut up 4-5 old hand towels and edged them with bias binding. Plus, I made some zipped pouches from leftover material scraps and a few pence for zips – have some unlined for clean wipes and some with waterproof lining for dirties. Let’s hope they work! I will report back in a few months.

  1. Cut up your old hand towels. I based my sizing roughly on commercially available microfibre, reusable, towelling wipes. I figured I’d make mine slightly larger, so as not to waste any material and it also meant less cutting! So, as my towels were folded in half, then into quarters and then again into eighths – I went with that and cut each towel into 8 pieces, rectangular in shape.
  2. I purchased a roll of white 25mm bias binding from my local fabric shop and pinned this around the raw edges (half each side of the edge, if you’re new to this). I didn’t need to bind every edge because the towels were already bound when whole.
  3. Then I stitched this in place using my sewing machine. You will need to use a heavy duty or jeans needle for this thickness of fabric. And that’s it – you have your wipes! They will be machine washable and tumble dryable at 60 degrees C, just like they were as towels. I plan on just chucking mine in with the reusable nappies.
  4. I decided to make these fabric cases to put mine in and they should also be very portable, when out and about or travelling. The design comes from a Cath Kidston sewing book (which I was very kindly given for Christmas). I have just made some unlined and some with a waterproof layer of PUL. I will see if I can get a tutorial up for those soon. I used fabric and ribbon scraps that I had leftover from other projects. The only items I had to purchase was a few zips for pence and the PUL fabric. I’ll report back on how they do – I may need to waterproof the seams of the wet bags. If you’re not into sewing, you can buy similar reusable wipes here and wet bags here.

Happy sewing people! Let me know how you get on in the comments.

Advertisements

DIY Comfy Jeans Hack!

I just had to share this amazing video I found: https://www.youtube.com/watch?v=hG0YssaRzls OK, so it’s for maternity jeans, but it will actually turn any uncomfortably tight jeans into a wonderfully comfy pair, with a soft, roll-down waistband. A waistband that can expand and contract with you! All you need is the offending jeans and an old top.

You just cut off the waistband and belt loops of your old jeans and the shoulders/ arms off your top. Then join the two together – et voila! I found it a nightmare to try and unpick the belt loops, so I did cut them off which left small holes. I just darned mine, but you could also just cut an extra centimetre or two off the waist so that you don’t need to worry.

I just made a pair with some jeans I was going to give to the charity shop because they weren’t a great fit, with a really low waistband and a slightly worn vest top which was too tight under the arms. So, these are basically free, new trousers and it only took me about 30 minutes from start to finish!

Ta da!